Rc Model Airplane Building

22
Feb

No items matching your keywords were found.

Rc Model Airplane Building

No items matching your keywords were found.

Boy Building Model Airplane

$24.99

Boy Building Model Airplane - Photographic Print

5-CH CMP DHC Beaver 1800mm Fiberglass RC Airplane Kit

$249

Specs: Wingspan 1800mm Length 1190mm Weight 2500-2600g Airfoil Section CLark Y Wing Area 38.5dm2 Wing Loading 65-68g/dm2 Requirements: Radio System Required 5 Channels 6 servos Recommended Motors 35-42 Recommended ESC 50-60A The well-known DHC-2 Beaver is a single-engined, high-wing, propeller-driven STOL aircraft. It is used for cargo and passenger hauling, aerial application, and has been widely adopted by armed forces as a utility aircraft. This very complete KIT model here features balsa and light weight plywood construction, pre-covered in the famous US Navy color trim. Rugged all wood laser cut construction provides strong, light weight structures that deliver outstanding performance and quick building. Featuring flap design that enhances steady approaches especially during critical times such as low speed landings. Scale realism is taken even further by the handmade stripes on flaps and the simulated radial engine. The scale two-opening-door design at both sides provides easy access for the EP setting. The kit includes wheels, small parts and a complete hardware pack, and it makes a perfect combination of good looks and outstanding performance.

RC Model Airplane #6

$19.95

This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material.

Boy (7-9) Building Model Airplane (B&W)

$24.99

Boy (7-9) Building Model Airplane (B&W) - Photographic Print

CMP Zero Fighter 50cc - 80" ARF Nitro Gas Radio Remote Controlled RC Airplane New!

$599.99

The Mitsubshi A6M5 52 with wingspan of 2100mm is the biggest brother from the CMPro Japanese Fighter Series. This model, well designed for 40~50cc gas engines, features a fiberglass molded fuselage and painted wing panels. The attention to detail results in an extremely realistic model that flies as look as it looks.     Wingspan 2100mm Length 1700mm Weight 6.2~6.5 kg Wing Loading 77~81 dm/2 Airfoil Naca 2415 Wing Area 80 dm/2 Radio Control 5~6 Ch 8~9 Servos purchase separately 2 Strok Engine 40~50 purchase separately The whole aircraft is painted in a matt finish which greatly enhances its scale features. A fixed undercarriage is included while optional retracts fitting is also available. Decals come ready applied and clear coated ? that doesn?t only make the kit more durable but shortens building time as well. A carbon fiber wing tube is included with kit.  

Airplane RC Crystal Set for Channel 4

$19

Airplane RC Crystal Set for Channel 4

Floats (.40 - .60 class RC Airplane)

$49

Floats (.40 - .60 class RC Airplane)

RC Airplane Joystick Flight Simulative Transmitter System

$149.95

RC Airplane Joystick Flight Simulative Transmitter System

5pcs SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane

$23.7

5pcs SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane

4pcs SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane

$19.5

4pcs SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane

DeHavilland Mosquito Twin 25~32 - 73" Engine Powered Radio Remote Controlled Nitro Gas Scale Airplane ARF

$399.7

CMP DeHavviland Mosquito 25~32 - 73" Nitro Gas Radio Remote Controlled Twin Engine Scale RC Warbird Airplane.  T he 73" Mosquito ARF is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage, center section, and cowling done in matching paint. The wings are sheeted foam, covered with solartex, painted to match. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The kit includes full color decals.   The kit box is large, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, producing a sample of this product for review that will produce no damage from shipping.  Included with the kit are 8-ounce fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider.  The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The 11-page instruction manual has excellent-quality step-by-step drawings. Pluses: ? Well engineered?all parts fit together nicely. ? Handsome painted finish and full-color decal sheet. Details and Recommendations: Type: Semiscale ARF Pilot Skill Level: Intermediate Wingspan: 73 inches Wing area: 1,286.5 square inches Length: 52.5 inches Weight: 11-11.5 pounds Wing loading: 20.6 ounces per square inch Engine: .25-.32 (two-stroke) or .26-.30 (four-stroke) Radio: Five- to six-channel tran smitter, seven to nine servos (rudder, elevator, flaps, one for each aileron, one for each throttle, one for each optional retract) Construction: Molded fiberglass fuselage, tail sections, wing center-section, and engine nacelles with light-plywood support, balsa-and-plywood wing panels and sections Covering/finish: Three-color flat-finished camouflage paint over fiberglass, film covered wings and tail Options: Retractable landing gear (Not Included) Construction: Model assembly begins with attaching the ailerons to the wings using cloth-style hinges provided in the kit. The engine nacelle splits the flaps on each wing panel, which are connected with a U-shaped joiner wire. The flaps are attached after the wing sections are joined, to make their alignment easier to match.             The wing is composed of a center-section and two outer panels. The outer panels and control surfaces are built-up wooden structures, and the center-section is a fiberglass shell with a plywood skeleton.             Two aluminum tubes?measuring 8 7 / 16 inches in length and 3 / 4 inch in diameter?installed with epoxy are used as spars to permanentl

ASP Sanye 2 Stroke 12A Glow Engine with Muffler for RC Airplane

$35.65

Model CC Cylinder Bore (mm) Stroke (mm) Prop Prefer RPM Weight (g) 12A 2.11 14.00 13.7 7x4 3000-19000 196    

DHC Beaver 1800mm RC Airplane ARF w/ Motor+ESC+Servos

$399

DHC Beaver is made by highly durable and lightweight fiberglass, meaning it has impact and shock resistant construction and easy to repair. Designed carefully for beginners and advanced users, it provides a stable flight at stunning speed. DHC Beaver is simply a superb combination of good looks and perfect performance. CMP is specialized in designing and manufacturing remote control model planes, and supplied them in the highest quality at competitive prices. As expected they have delivered an innovative and stunning product once again! Getting the optional float set(sold separately) allow you to even land and takeoff on water, as you can quickly change the landing gear in this easy setup. Requires: 5 Channel Transmitter/Receiver, Batteries for Transmitter, and simple/quick assembly   Features Carefully crafted for fast speed and smooth flight Decals are beautifully applied and flat-coated Sturdy and Lightweight Fiberglass construction Optional float set (sold separately) Almost Ready To fly version Specs Wingspan 1800mm Length 1190mm Weight 2500-2600g Airfoil Section CLark Y Wing Area 38.5dm2 Wing Loading 65-68g/dm2 Motors 35-42 ESC 50-60A Recommended battery: 4s (14.8v) 3000-4000mah Radio System Required 5 Channels 6 servos (not included)

Model Airplane

$14.99

Model Airplane - Premium Poster

130-MOTOR for DragonFly 2-CH RC Airplane

$3

130-MOTOR for DragonFly 2-CH RC Airplane

CMP EP-P28 Radio Controlled 50~55 Electric Scale RC Airplane Kit

$149.95

RADIO CONTROLLED 50~55 EP SCALE AIRPLANE The EP-PA28 features beautifully covered surfaces with scale details printed on. The underlying construction is build up balsa which results in a light and strong model. The kit comes complete with mechanical retracts and scale cockpit. A truly great model with fantastic flying performance. Wingspan 1530mm Length 1200mm Weight 2.6~2.8 kg Wing Loading 60~64g dm/2 Airfoil Naca 2416 Wing Area 43.5 dm/2 Radio Control 4~6 Ch 7~9 Servos purchase separately Motors 50~55 purchase separately ESC 50~60A purchase separately Features: Flaps efficiently reduce landing speed and make a smooth flight Spray-painted scale cockpit and interior Removable top compartment to allow enough clearance for the EP settings Versatile mounting box to accommodate different motors The model comes complete with pre-fitted mechanical retracts Scale panel line details are pre-printed on the covering, saving hours of time for the scale enthusiasts. Optional Features: Scale landing gear is to be purchased separately.

3pcs T-Pro SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane

$14.7

3pcs T-Pro SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane

Revell Corsair F4U-4 1:48 Scale
List Price: ~~$15.99~~
Sale Price: $9.99
You save: $6.00 (38%)

Eligible for free shipping!
Availability: Usually ships in 24 hours

New Ray 1/60 Boeing CH-47 Chinook
Sale Price: $12.61

Eligible for free shipping!
Availability: Usually ships in 24 hours

Guillow 1903 Wright Brothers Flyer
List Price: ~~$31.99~~
Sale Price: $20.15
You save: $11.84 (37%)